Rabu, 26 Januari 2022

JUAL WATER QUALITY MUTI PARAMETER ALAT UKUR KUALITAS AIR WATER TESTER WATER QUALITY METER ALAT UJI AIR ALAT UKUR AIR HARGA WATER QUALITY MULTI PARAMETER Rp... , pH, Cond,TDS, Salt, ORP,DO, TURBIDITY, TSS, CHLORIN, AMMONIA, SILVER, NITRAT, LOGAM BERAT DALAM AIR, Merk - BANTE - EZDO - PALINTEST - MILWAUKE - LOVIBOND - VZOR - AZ INSTRUMENT - EXTECH - LUTRON - HANNA INSTRUMENT - EUTECH - HORIBA - AQUA - LOVIBOND - DKK TOA.

BINTANG INSTRUMENT 
HP : 081362449440 / 081310157965 

Email : b081362449440@yahoo.com
Up : Mr Jonathan
===============================



 ============================================================
 1. Compact Turbimeter
     Type : PTH 090
     Merk : Palintest - UK


Specification :
Optical System QuadoptiX™ optical system with two independent 860nm LED sources, ISO7027 compliant Range 0.0 – 1050 NTU Display High clarity LCD with backlight User Interface Soft key access with English, French, Spanish, German and Italian language Result Units NTU, FNU, FTU and mg/l (TSS mode) Modes Turbidity (normal, average and continuous capture), Total Suspended Solids Data Storage 100 results including date, time, sample ID, operator ID and mode. Last 12 good calibrations including Operator ID Size (W x L x H) 82 x 225 x 50 mm Weight 340g (including batteries) Power Supply 2 x ‘AA’ batteries - See more at: http://www.palintest.com/products/compact-turbimeter/#sthash.WJhpvp4e.dpuf
Optical System QuadoptiX™ optical system with two independent 860nm LED sources, ISO7027 compliant Range 0.0 – 1050 NTU Display High clarity LCD with backlight User Interface Soft key access with English, French, Spanish, German and Italian language Result Units NTU, FNU, FTU and mg/l (TSS mode) Modes Turbidity (normal, average and continuous capture), Total Suspended Solids Data Storage 100 results including date, time, sample ID, operator ID and mode. Last 12 good calibrations including Operator ID Size (W x L x H) 82 x 225 x 50 mm Weight 340g (including batteries) Power Supply 2 x ‘AA’ batteries - See more at: http://www.palintest.com/products/compact-turbimeter/#sthash.WJhpvp4e.dpuf



Optical System QuadoptiX™ optical system with two independent 860nm LED sources, ISO7027 compliant  
Range 0.0 – 1050 NTU  
Display High clarity LCD with backlight 
User Interface Soft key access with English, French, Spanish, German and Italian language  
Result Units NTU, FNU, FTU and mg/l (TSS mode)  
Modes Turbidity (normal, average and continuous capture), Total Suspended Solids 
Data Storage 100 results including date, time, sample ID, operator ID and mode. Last 12 good calibrations including Operator ID
 Size (W x L x H) 82 x 225 x 50 mm 
Weight 340g (including batteries)  
Power Supply 2 x ‘AA’ batteries - 



 ============================================================
 2. Multi Parameter Portable Water Quality System
     Type : Macro 900
     Merk : Palintest - UK

Spesifikasi :
ª Parameters
1 Turbidity : 0 - 1000 NTU
2 Dissolved Oxygen : 0 - 500% / 0- 50.00 mg/
3 Conductivity : 0 - 200 mS/ cm ( 200, 000 µ s/ cm)
4 TDS : 0 - 100, 000 mg/ L ( ppm)
5 Resistivity : 5& cm - 1M& cm
6 Salinity : 0 - 70 PSU / 0 - 70 ppt ( g/ Kg)
7 SSG : 0 - 50 Ã t ( Seawater Specific Gravity)
8 pH : 0 - 14 pH
9 ORP : ± 2000mV
10 Depth : 0-30M
11 Temperature : -5º C - 50º
ª Dimensions : ( H x W x D) : 180mm x 90mm x 39mm
ª Weight : ( including batteries) : 450g
ª Power Supply : 5 ‘ AA’ cells
ª Battery life : > 40 hours ( NiMH)
ª User Interface : Nine rubberised keys, LCD screen
with backlight
ª Languages : English, French, Spanish
( German on request)
ª Data memory : 1900 full data sets plus GLP data
ª PC Interface : USB ( cable provided)
ª Operating Temperature : -20 to 70° C
ª Ingress Protection : IP67
ª GPS Specification : 12 channel with integral antenna,
± 10m in three dimensions
ª Atmospheric Pressure : 150 – 1150 mb ± 1 mb
ª Complete Unit ( tidak termasuk dengan sensor)
1 Main unit Macro 900 meter with integral GPS and atmospheric
pressure monitioring
2 Macro Link Software CD
3 USB Cable
4 Screwdriver
5 Quick release lanyard
6 5 AA batteries supplied
7 Manual books
8 Heavy Duty case
9 pH 7 buffer 300ml
10 Cable 10 mtr

iNFORMASI ORDER :
MAP 2000 1 Conductivity
2 TDS
3 Resistivity
4 Salinity
5 Seawater specific gravity
6 DO ( Galvanic)
7 pH
8 Temperature

MAP 2100 1 Turbidity
2 Conductivity
3 TDS
4 Resistivity
5 Salinity
6 Seawater specific gravity
7 Depth
8 DO ( Galvanic)
9 pH
10 ORP
11 Temperature


 ============================================================
 3. Portable Photometer Water Analysis
     Type : 7500
     Merk : Palintest - UK
The Palintest Photometer 7500 takes portable water testing to new heights. The smooth good looks cover a solidly engineered instrument with a high specification and high performance. Built around the Palintest range of water test reagents, the Photometer 7500 has automatic wavelength selection for each of its pre-programmed methods.
Smart, rugged and easy to use, the 7500 is the ideal field instrument for engineers.
- Fully waterproof with IP67 rating
- Rugged, portable design with no moving parts
- Automatic method set up for each parameter
- USB port for easy computer interface
- 500 test results stored on-board
- Large backlit screen.



Wavelengths 450nm, 500nm, 550nm, 570nm, 600nm and 650nm 
Wavelength Selection Automatic
 Accuracy ± 1%T Range 1 – 100%T  
Display Large LCD screen and optional backlight 
User Interface On screen prompts available in English, French, Spanish, Italian and German 
Result Units g/l, mg/l, ppm, mmol/l, μmol/l  
Number of Methods Over 100 parameters and methods available 
Test Cuvettes Automatic centering for cylindrical cuvettes from 12 – 20 mm OD  
User Defined Methods Up to 30 additional methods, defined by user  
Connectivity Waterproof USB connection  
Data Storage 500 results including date, time, sample ID, method and units. Export of data in CSV format  
Size (W x L x H) 150 x 250 x 70 mm  
Weight 975g  
Power Supply 3 x 1.5V ‘AA’ batteries, 
USB power from mains adaptor or PC


 ============================================================
 4. UV VIS SPECTROPHOTOMETER
     Type : 9100
     Merk : Palintest - UK

Wavelengths 450nm, 500nm, 550nm, 570nm, 600nm and 650nm Wavelength Selection Automatic Accuracy ± 1%T Range 1 – 100%T Display Large LCD screen and optional backlight User Interface On screen prompts available in English, French, Spanish, Italian and German Result Units g/l, mg/l, ppm, mmol/l, μmol/l Number of Methods Over 100 parameters and methods available Test Cuvettes Automatic centering for cylindrical cuvettes from 12 – 20 mm OD User Defined Methods Up to 30 additional methods, defined by user Connectivity Waterproof USB connection Data Storage 500 results including date, time, sample ID, method and units. Export of data in CSV format Size (W x L x H) 150 x 250 x 70 mm Weight 975g Power Supply 3 x 1.5V ‘AA’ batteries, USB power from mains adaptor or PC - See more at: http://www.palintest.com/products/photometer-7500/#sthash.Fiz0pwg9.dpuf


Fungsi : Sebagai alat untuk mendeteksi kualitas air sesuai dengan reagent

Spesifikasi :
- Photometric System : Split beam
- Wavelength Range : 190 – 1100nm
- Wavelength Accuracy : ± 1.0nm
- Wavelength Reproducibility : 0.2nm
- Spectral Bandwidth : 2 nm
- Photometric Range : -0.3 – 3.0 Abs; 0 – 200% T
- Photometric Accuracy : ± 0.3% T
- Photometric Reproducibility : 0.15% T
- Stray Light 0.05% T
: 0.05% T
- Baseline Flatness : ± 0.002Abs
- Noise 0% T: ± 0.005% T : 0% T: ± 0.005% T
: 100% T: 0.15% T
- Baseline Stability

 ============================================================
 4. PORTABLE WATER QUALITY MULTI PARAMETER
     Type : 900P-UK
     Merk : BANTE INSTRUMENT


SPECIFICATIONS :

   P11 Glass pH Electrode ( Made in UK- Inggris )
   K10 Conductivity Cell ( Made in UK - Inggris )
   DO100 DO Probe ( Made in US - Amerika Serikat )
   Electrolyte Solution and Membrane Cap Kit
   Temperature Probe
   pH Buffer Pouches ( pH4.01/ 7.00/ 10.01)
   Calibration Solutions
 ( 146uS/ cm, 1413uS/ cm, 12.88mS/ cm)
   Carrying Case and “ AA” Batteries

* pH     Range     :      - 2.000 - 20.000pH
 Resolution     :      0.1 / 0.01 / 0.001pH, Selectable
 Accuracy     :      ± 0.002pH
 Calibration Points     :      Up to 5 points
 pH Buffer Groups     :      USA ( pH 1.68/ 4.01/ 7.00/ 10.01/ 12.45) , NIST
 ( pH 1.68/ 4.01/ 6.86/ 9.18/ 12.45) ,
 DIN ( pH1.09/ 4.65/ 6.79/ 9.23/ 12.75)

*  Ion     Range( ppm, mg/ L, moI/ L)      :      0.001-19999
 Accura cy     :      ± 0.5% F.S ( Monovalent) , ± 0.1% F.S ( Divalent)
 Calibration Points     :      2 to 5 points
 Calibration Solutions     :      0.001, 0.01, 0.1, 1, 10, 100, 1000,
 10000ppm, mg/ L, moI/ L or mmoI/ L

* ORP     ORP( mV ) Range     :      0 - ± 1999.9mV
 Resolution     :      1 / 0.1mV, Selectable
 ORP( mV) Accuracy     :      ± 0.2mV
 Calibration Points     :      1 point
 Measurement Modes     :      Absolute or Relative mV

 *Conductivity     Range     :      0 - 200mS/ cm
 Resolution     :      1 / 0.1 / 0.01
 Accuracy     :      ± 0.5% F.S
 Calibration Points     :      Up to 5 points
 Calibration Solutions     :      10uS, 84uS, 1413uS, 12.88mS, 111.8mS
 Cell Constant     :      0.1 / 1 / 10 / User-defined
 Temperature Coefficient     :      0.0 - 10.0% per pC, Linear or Pure Water
 Normalization Temperature     :      20pC - 25pC, Selectable

* TDS     Range     :      0 - 10ppt ( Max. 200ppt)
 Resolution     :      1 / 0.1 / 0.01
 Accuracy     :      ± 1% F.S
 TDS Conversion Factor     :      0.0 - 1.0

 *Salinity     Range     :      0 - 80ppt or psu
 Resolution     :      1 / 0.1 / 0.01
 Accuracy     :      ± 1% F.S
 Measurement Modes     :      Practical Salinity or Seawater
 Measurement Standart

* Resistivity     Range     :      0 - 100Mü
 Resolution     :      1 / 0.1 / 0.01
 Accuracy     :      ± 1% F.S

 Range     :      0.00 - 20.00mg/ L or ppm
 Resolution     :      0.01mg/ L 0.01ppm
 Accuracy     :      ± 0.2mg/ L or ppm ( Calibration &
 Measurement is in same temp)

* Dissolved Oxygen     % Saturation of Oxygen     :      0.0 - 200.0%
 Resolution     :      0.1%
 Accuracy     :      ± 2%
 Barometric Pressure     :      450 - 850mmHg
 Salinity Correction     :      0 - 50g/ L

* Temp.     Range     :      0.0 - 105.0pC / 32 - 221pF
 Accuracy     :      0.5 fC/ -0.9 fF

 General Features     Temperature Compensation     :      0-100' C, 32-212' F, Automatic or Manual
 Stability Condition of Measurement     :      High ( HI) or Low ( LO) , Selectable
 Calibration Due Reminder     :      1 to 30 Days, Selectable
 Auto-Hold Function     :      Yes
 Auto-Off Function     :      10 / 20 / 30 minutes after last key pressed
 Electrode Diagnosis     :      Slope, Offset
 Memory     :      500 data sets with Date/ Time stamping
 Output     :      USB Connection Interface
 Power Requirements     :      3x1.5 " AAA" Batteries
 Dimensions     :      170( L) x 85( W) x 30( H) mm
 Weight     :      300 Grams

 ============================================================
 5. PORTABLE WATER QUALITY MULTI PARAMETER
     Type : 900P-CN
     Merk : BANTE INSTRUMENT








Specifications :
 1) pH Meter.
 Range     :      - 2.000 - 20.000pH
 Resolution     :      0.1 / 0.01 / 0.001pH, Selectable
 Accuracy     :      ± 0.002pH
 Calibration Points     :      Up to 5 points
 pH Buffer Groups     :      USA ( pH 1.68/ 4.01/ 7.00/ 10.01/ 12.45) , NIST ( pH 1.68/ 4.01/ 6.86/ 9.18/ 12.45) , DIN ( pH1.09/ 4.65/ 6.79/ 9.23/ 12.75)
 .
 2) Ion
 Range( ppm, mg/ L, moI/ L)      :      0.001-19999
 Accuracy     :      ± 0.5% F.S ( Monovalent) , ± 0.1% F.S ( Divalent)
 Calibration Points     :      2 to 5 points
 Calibration Solutions     :      0.001, 0.01, 0.1, 1, 10, 100, 1000, 10000ppm, mg/ L, moI/ L or mmoI/ L
 .
 3) ORP
 ORP( mV ) Range     :      0 - ± 1999.9mV
 Resolution     :      1 / 0.1mV, Selectable
 ORP( mV) Accuracy     :      ± 0.2mV
 Calibration Points     :      1 point
 Measurement Modes     :      Absolute or Relative mV
 .
 4) Conductivity
 Range     :      0 - 200mS/ cm
 Resolution     :      1 / 0.1 / 0.01
 Accuracy     :      ± 0.5% F.S
 Calibration Points     :      Up to 5 points
 Calibration Solutions     :      10uS, 84uS, 1413uS, 12.88mS, 111.8mS
 Cell Constant     :      0.1 / 1 / 10 / User-defined
 Temperature Coefficient     :      0.0 - 10.0% per pC, Linear or Pure Water
 Normalization Temperature     :      20pC - 25pC, Selectable
 .
 5) TDS
 Range     :      0 - 10ppt ( Max. 200ppt)
 Resolution     :      1 / 0.1 / 0.01
 Accuracy     :      ± 1% F.S
 TDS Conversion Factor     :      0.0 - 1.0
 .
 6) Salinity
 Range     :      0 - 80ppt or psu
 Resolution     :      1 / 0.1 / 0.01
 Accuracy     :      ± 1% F.S
 Measurement Modes     :      Practical Salinity or Seawater Measurement Standart
 .
 7) Resisitivy
 Range     :      0 - 100Mü
 Resolution     :      1 / 0.1 / 0.01
 Accuracy     :      ± 1% F.S
 .
 8) Disolved Oxygen ( DO meter )
 Range     :      0.00 - 20.00mg/ L or ppm
 Resolution     :      0.01mg/ L 0.01ppm
 Accuracy     :      ± 0.2mg/ L or ppm ( Calibration & Measurement is in same temp)
 % Saturation of Oxygen     :      0.0 - 200.0%
 Resolution     :      0.1%
 Accuracy     :      ± 2%
 Barometric Pressure     :      450 - 850mmHg
 Salinity Correction     :      0 - 50g/ L
 .
 9) Temperature
 Range     :      0.0 - 105.0pC / 32 - 221pF
 Accuracy     :      0.5 fC/ -0.9 fF
 .
 General Features:
 Temperature Compensation     :      0-100' C, 32-212' F, Automatic or Manual
 Stability Condition of Measurement     :      High ( HI) or Low ( LO) , Selectable
 Calibration Due Reminder     :      1 to 30 Days, Selectable
 Auto-Hold Function     :      Yes
 Auto-Off Function     :      10 / 20 / 30 minutes after last key pressed
 Electrode Diagnosis     :      Slope, Offset
 Memory     :      500 data sets with Date/ Time stamping
 Output     :      USB Connection Interface
 Power Requirements     :      3x1.5 " AAA" Batteries
 Dimensions     :      170( L) x 85( W) x 30( H) mm
 Weight     :      300 Grams

 ============================================================
 6. PORTABLE WATER QUALITY MULTI PARAMETER
     Type : 221-CN
     Merk : BANTE INSTRUMENT



 Specifications:
   Standard portable pH/ mV meter
   pH Range: -2.000~ 20.000pH ( ± 0.002pH)
   mV Range: -1999.9~ 1999.9mV ( ± 0.2mV)
   Temperature Range 0~ 105 oC ( ± 0.5 oC)
   Up to 5 points push-button calibration, Auto-buffer recognition, Automatic Temperature Compensation, Automatically freezes stable measured values, Selectable pH buffer standards ( USA, NIST and DIN) , ORP measurement modes, Temperature units ( oC or oF) , Solutions ( 0.001/ 0.01/ 0.1) and Stability conditions, Automatic calibration due reminder, Real-time help message, Sensor status display, Reset function, Memory stores up to 500 readings, USB communication interface

 Include :
   E65-1-BNC Glass pH Electrode
   501 ORP Electrode
   Temperature Probe
   pH Buffer Solutions ( pH4.01/ 7.00/ 10.01)
   Carrying Case and “ AA” Batteries

 ============================================================
 7. PORTABLE WATER QUALITY MULTI PARAMETER
     Type : 901-CN
     Merk : BANTE INSTRUMENT

 Specifications :
 pH Range      :      -2.000~ 20.000pH
 pH Accuracy      :      ± 0.002pH
 Resolution      :      0.001, 0.01, 0.1pH, Selectable
 Calibration Points      :      Up to 5 points
 Calibration Solutions      :      USA( pH1.68/ 4.01/ 7.00/ 10.01/ 12.45) , NIST( pH1.68/ 4.01/ 6.86/ 9.18/ 12.45) , DIN( pH1.09/ 4.65/ 6.79/ 9.23/ 12.75)
 mV Range      :      -1999.9~ 1999.9mV
 mV Accuracy      :      ± 0.2mV
 Resolution      :      0.1, 1mV, Selectable
 Conductivity Range      :      0~ 20mS/ cm ( Max.200mS/ cm)
 Conductivity Accuracy      :      ± 0.5% Full Scale
 Calibration Points      :      Up to 5 points
 Calibration Solutions      :      10uS/ cm, 84uS/ cm, 1413uS/ cm, 12.88mS/ cm, 111.8mS/ cm
 TDS Range      :      0~ 10ppt ( Max. 20ppt, Depending on factor setting)
 TDS Accuracy      :      ± 1% Full Scale
 TDS Factor      :      0.1~ 1.0 ( Default 0.5)
 Resolution      :      0.001, 0.01, 0.1, 1, Automatic
 Temperature Coefficient      :      0.0~ 10.0% per ° C
 Compensation Modes      :      Linear or Pure Water
 Cell Constant      :      K= 0.1, 1, 10, Selectable
 Normalization Temperature      :      20° C or 25° C
 Temperature Range : 0~ 105° C, 32~ 221° F
 Temperature Accuracy :      ± 0.5° C, ± 0.9° F
 Temperature Calibration : Manual
 Temperature Compensation :      0~ 100° C, 32~ 212° F, Automatic or Manual
 Auto-Off      : Manual or Automatic ( 10, 20, 30 minutes after last key pressed, Selectable)
 Hold Function :      Manual or Automatic
 Stability Conditions : Low or High, Selectable
 Calibration due reminder :      0 to 30 days
 Reset Function : Yes
 Memory : 500 data sets with Date/ Time stamping
 Output : USB Communication Interface
 Connector : BNC and 6-pin connector
 Power Requirements : 3× 1.5V " AA" Batteries
 Battery Life :      Approximately 150 hours
 Dimensions : 170( L) × 85( W) × 30( H) mm
 Weight : 300 grams

 ============================================================
 8. PORTABLE WATER QUALITY MULTI PARAMETER
     Type : 902-CN
     Merk : BANTE INSTRUMENT
 Specifications :
 pH Range :      -2.000~ 20.000pH
 pH Accuracy      :      ± 0.002pH
 Resolution      :      0.001, 0.01, 0.1pH, Selectable
 Calibration Points      :      Up to 5 points
 Calibration Solutions      :      USA( pH1.68/ 4.01/ 7.00/ 10.01/ 12.45) , NIST( pH1.68/ 4.01/ 6.86/ 9.18/ 12.45) , DIN( pH1.09/ 4.65/ 6.79/ 9.23/ 12.75)
 mV Range      :      -1999.9~ 1999.9mV
 mV Accuracy      :      ± 0.2mV
 Resolution      :      0.1, 1mV, Selectable
 Conductivity Range      :      0~ 20mS/ cm ( Max.200mS/ cm)
 Conductivity Accuracy      :      ± 0.5% Full Scale
 Calibration Points      :      Up to 5 points
 Calibration Solutions      :      10uS/ cm, 84uS/ cm, 1413uS/ cm, 12.88mS/ cm, 111.8mS/ cm
 TDS Range      :      0~ 10ppt ( Max. 20ppt, Depending on factor setting)
 TDS Accuracy      :      ± 1% Full Scale
 TDS Factor      :      0.1~ 1.0 ( Default 0.5)
 Salinity Range      :      0~ 10ppt ( Max.80ppt)
 Salinity Accuracy      :      ± 1% Full Scale
 Salinity Measurement Modes      :      Practical Salinity ( PSU) or Seawater Measurement Standard ( ppt)
 Resistivity Range      :      0~ 100M©
 Resistivity Accuracy      :      ± 1% Full Scale
 Temperature Coefficient      :      0.0~ 10.0% per ° C
 Compensation Modes      :      Linear or Pure Water
 Cell Constant      :      K= 0.1, 1, 10, Selectable
 Normalization Temperature      :      20° C or 25° C
 Temperature Range      :      0~ 105° C, 32~ 221° F
 Temperature Accuracy      :      ± 0.5° C, ± 0.9° F
 Temperature Calibration      :      Manual
 Temperature Compensation      :      0~ 100° C, 32~ 212° F, Automatic or Manual
 Auto-Off      :      Manual or Automatic ( 10, 20, 30 minutes after last key pressed, Selectable)
 Hold Function      : Manual or Automatic
 Stability Conditions      :      Low or High, Selectable
 Calibration due reminder      :      0 to 30 days
 Reset Function      :      Yes
 Memory      :      500 data sets with Date/ Time stamping
 Output      :      USB Communication Interface
 Connector      :      BNC and 6-pin connector
 Power Requirements :      3× 1.5V " AA" Batteries
 Battery Life      :      Approximately 150 hours
 Dimensions      :      170( L) × 85( W) × 30( H) mm
 Weight      :      300 grams


 ============================================================
 9. PORTABLE WATER QUALITY MULTI PARAMETER
     Type : 903-CN
     Merk : BANTE INSTRUMENT
 Specifications :
 pH Range      : -2.000~ 20.000pH
 pH Accuracy : ± 0.002pH
 Resolution : 0.001, 0.01, 0.1pH, Selectable
 Calibration Points : Up to 5 points
 Calibration Solutions : USA( pH1.68/ 4.01/ 7.00/ 10.01/ 12.45) , NIST( pH1.68/ 4.01/ 6.86/ 9.18/ 12.45) , DIN( pH1.09/ 4.65/ 6.79/ 9.23/ 12.75)
 Temperature Compensation : 0~ 100° C, 32~ 212° F, Automatic or Manual
 mV Range : -1999.9~ 1999.9mV
 mV Accuracy : ± 0.2mV
 Resolution : 0.1, 1mV, Selectable
 Dissolved Oxygen Range : 0.00~ 20.00mg/ L or ppm
 Resolution : 0.01mg/ L
 Dissolved Oxygen Accuracy      : ± 0.2mg/ L ( Calibration and measurement under the conditions of same temperature)
 % Saturation of Oxygen : 0.0~ 200.0%
 Accuracy : ± 2.0%
 Salinity Correction : 0~ 50g/ L
 Pressure Correction : 60.0~ 112.5kPa, 450~ 850mmHg
 Temperature Compensation : 0~ 50° C, 32~ 122° F, Automatic
 Temperature Range : 0~ 105° C, 32~ 221° F
 Temperature Accuracy : ± 0.5° C, ± 0.9° F
 Temperature Calibration : Manual
 Auto-Off      : Manual or Automatic ( 10, 20, 30 minutes after last key pressed, Selectable)
 Hold Function : Manual or Automatic
 Stability Conditions : Low or High, Selectable
 Calibration due reminder : 0 to 30 days
 Reset Function : Yes
 Memory : 500 data sets with Date/ Time stamping
 Output : USB Communication Interface
 Connector : BNC and 6-pin connector
 Power Requirements : 3× 1.5V " AA" Batteries
 Battery Life : Approximately 150 hours
 Dimensions : 170( L) × 85( W) × 30( H) mm
 Weight : 300 grams

 ============================================================
 10 . PORTABLE WATER QUALITY MULTI PARAMETER
         Type : 904-CN
         Merk : BANTE INSTRUMENT


Specifications :
 Conductivity Range : 0~ 20mS/ cm ( Max.200mS/ cm)
 Conductivity Accuracy : ± 0.5% Full Scale
 Calibration Points : Up to 5 points
 Calibration Solutions : 10uS/ cm, 84uS/ cm, 1413uS/ cm, 12.88mS/ cm, 111.8mS/ cm
 TDS Range : 0~ 10ppt ( Max. 20ppt, Depending on factor setting)
 TDS Accuracy : ± 1% Full Scale
 TDS Factor : 0.1~ 1.0 ( Default 0.5)
 Salinity Range :      0~ 10ppt ( Max.80ppt)
 Salinity Accuracy : ± 1% Full Scale
 Salinity Measurement Modes : Practical Salinity ( PSU) or Seawater Measurement Standard ( ppt)
 Resistivity Range : 0~ 100M©
 Resistivity Accuracy : ± 1% Full Scale
 Temperature Coefficient : 0.0~ 10.0% per ° C
 Compensation Modes      : Linear or Pure Water
 Cell Constant      :      K= 0.1, 1, 10, Selectable
 Normalization Temperature      :      20° C or 25° C
 Temperature Compensation :      0~ 100° C, 32~ 212° F, Automatic or Manual
 Dissolved Oxygen Range      : 0.00~ 20.00mg/ L or ppm
 Resolution :      0.01mg/ L
 Dissolved Oxygen Accuracy      : ± 0.2mg/ L ( Calibration and measurement under the conditions of same temperature)
 % Saturation of Oxygen : 0.0~ 200.0%
 Accuracy : ± 2.0%
 Salinity Correction      : 0~ 50g/ L
 Pressure Correction :      60.0~ 112.5kPa, 450~ 850mmHg
 Temperature Compensation :      0~ 50° C, 32~ 122° F, Automatic
 Temperature Range : 0~ 105° C, 32~ 221° F
 Temperature Accuracy :      ± 0.5° C, ± 0.9° F
 Temperature Calibration :      Manual
 Auto-Off      : Manual or Automatic ( 10, 20, 30 minutes after last key pressed, Selectable)
 Hold Function : Manual or Automatic
 Stability Conditions :      Low or High, Selectable
 Calibration due reminder :      0 to 30 days
 Reset Function      : Yes
 Memory      : 500 data sets with Date/ Time stamping
 Output      : USB Communication Interface
 Connector :      BNC and 6-pin connector
 Power Requirements      : 3× 1.5V " AA" Batteries
 Battery Life : Approximately 150 hours
 Dimensions : 170( L) × 85( W) × 30( H) mm
 Weight : 300 grams

 ============================================================
 11 . BENCHTOP WATER QUALITY MULTI PARAMETER
        Type : 900P-CN
         Merk : BANTE INSTRUMENT

 Specifications :
 pH Range      :      -2.000~ 20.000pH
 pH Accuracy      :      ± 0.002pH
 Resolution      :      0.001, 0.01, 0.1pH, Selectable
 Calibration Points      :      Up to 5 points
 Calibration Solutions      :      USA( pH1.68/ 4.01/ 7.00/ 10.01/ 12.45) , NIST( pH1.68/ 4.01/ 6.86/ 9.18/ 12.45) , DIN( pH1.09/ 4.65/ 6.79/ 9.23/ 12.75)
 Ion Concentration Range      :      0.001~ 19999ppm, mg/ L, mol/ L ( Depending on measuring range of Ion Selective Electrode)
 Ion Concentration Accuracy      : ± 0.5% Full Scale ( Monovalent) , ± 1% Full Scale ( Divalent)
 Calibration Points      :      2 to 5 points
 Calibration Solutions      :      0.001, 0.01, 0.1, 1, 10, 100, 1000, 10000ppm, mol/ L, mg/ L
 mV Range      :      -1999.9~ 1999.9mV
 mV Accuracy      :      ± 0.2mV
 Resolution      :      0.1, 1mV, Selectable
 Conductivity Range      :      0~ 20mS/ cm ( Max.200mS/ cm)
 Conductivity Accuracy      :      ± 0.5% Full Scale
 Calibration Points      :      Up to 5 points
 Calibration Solutions      :      10uS/ cm, 84uS/ cm, 1413uS/ cm, 12.88mS/ cm, 111.8mS/ cm
 TDS Range      :      0~ 10ppt ( Max. 20ppt, Depending on factor setting)
 TDS Accuracy      :      ± 1% Full Scale
 TDS Factor      :      0.1~ 1.0 ( Default 0.5)
 Salinity Range      :      0~ 10ppt ( Max.80ppt)
 Salinity Accuracy      :      ± 1% Full Scale
 Salinity Measurement Modes      :      Practical Salinity ( PSU) or Seawater Measurement Standard ( ppt)
 Resistivity Range      :      0~ 100M©
 Resistivity Accuracy      :      ± 1% Full Scale
 Resolution      :      0.001, 0.01, 0.1, 1, Automatic
 Temperature Coefficient      :      0.0~ 10.0% per ° C
 Compensation Modes      :      Linear or Pure Water
 Cell Constant      :      K= 0.1, 1, 10, Selectable
 Normalization Temperature      :      20° C or 25° C
 Dissolved Oxygen Range      :      0.00~ 20.00mg/ L or ppm
 Resolution      :      0.01, 0.1mg/ L, Selectable
 Dissolved Oxygen Accuracy      :      ± 0.2mg/ L ( Calibration and measurement under the conditions of same temperature)
 % Saturation of Oxygen      :      0.0~ 200.0%
 Accuracy      :      ± 2.0%
 Salinity Correction      :      0~ 50g/ L
 Pressure Correction      :      60.0~ 112.5kPa, 450~ 850mmHg
 Temperature Range      :      0~ 105° C, 32~ 221° F
 Temperature Accuracy      :      ± 0.5° C, ± 0.9° F
 Temperature Calibration      :      Manual
 Temperature Compensation      :      0~ 100° C, 32~ 212° F, Automatic or Manual; DO Mode: 0~ 50° C, 32~ 122° F, Automatic
 Auto-Off      :      Manual or Automatic ( 10, 20, 30 minutes after last key pressed, Selectable)
 Hold Function      :      Manual or Automatic
 Stability Conditions      :      Low or High, Selectable
 Calibration due reminder      :      0 to 30 days
 Reset Function      :      Yes
 Memory      :      500 data sets with Date/ Time stamping
 Output      :      USB Communication Interface
 Connector      :      BNC and 6-pin connector
 Power Requirements      :      DC5V, using AC adapters, 220VAC/ 50Hz
 LCD Display      :      Custom dual-display LCD ( 130× 110mm)
 Dimensions      :      210( L) × 188( W) × 60( H) mm
 Weight      :      1.2kg

 ============================================================
 12 . Portabe Water Quality Meter
        Type : Silver Ion Meter

         Merk : BANTE INSTRUMENT
 Specifications:
 Ion Concentration Range: 1× 10-7~ 1M

 Ion Concentration Accuracy: ± 1% Full Scale
 Selectable Units: ppm, mg/ L, mol/ L
 Calibration Points: 2 to 5 points
 Calibration Solutions: 0.001, 0.01, 0.1, 1, 10, 100, 1000, 10000ppm or mg/ L or mol/ L
 mV Range: -1999.9~ 1999.9mV
 mV Accuracy: ± 0.2mV
 Temperature Range: 0~ 105° C, 32~ 221° F
 Temperature Accuracy: ± 0.5° C, ± 0.9° F
 Temperature Calibration: Manual
 Temperature Compensation: 0~ 100° C, 32~ 212° F, Automatic or Manual
 Auto-Off: Manual or Automatic ( 10, 20, 30 minutes after last key pressed, Selectable)
 Hold Function: Manual or Automatic
 Stability Conditions: Low or High, Selectable
 Calibration due reminder: 0 to 30 days
 Reset Function: Yes
 Memory: 500 data sets with Date/ Time stamping
 Output: USB Communication Interface
 Connector: BNC
 Power Requirements: 3× 1.5V " AA" Batteries
 Dimensions: 170( L) × 85( W) × 30( H) mm
 Weight: 300 grams

 Accessories:
 * Silver Ion Selective Electrode ( Made in US)

 * TP-10K Temperature Probe
 * Storage Bottles
 * Carrying Case and " AA" Batteries

============================================================
 13 . Portabe Water Quality Meter
        Type : Cyanide Ion Meter

         Merk : BANTE INSTRUMENT

 Specifications :
 Ion Concentration Range      :      8× 10-6~ 0.01M
 Ion Concentration Accuracy      ý      ± 1% Full Scale
 Selectable Units      ý      ppm, mg/ L, mol/ L
 Calibration Points      ý      2 to 5 points
 Calibration Solutions      ý      0.001, 0.01, 0.1, 1, 10, 100, 1000, 10000ppm or mg/ L or mol/ L
 mV Range      ý      -1999.9~ 1999.9mV
 mV Accuracy      ý      ± 0.2mV
 Temperature Range      ý      0~ 105° C, 32~ 221° F
 Temperature Accuracy      ý      ± 0.5° C, ± 0.9° F
 Temperature Calibration :      Manual
 Temperature Compensation :      0~ 100° C, 32~ 212° F, Automatic or Manual
 Auto-Off      :      Manual or Automatic ( 10, 20, 30 minutes after last key pressed, Selectable)
 Hold Function      :      Manual or Automatic
 Stability Conditions      :      Low or High, Selectable
 Calibration due reminder      :      0 to 30 days
 Reset Function      :      Yes
 Memory      :      500 data sets with Date/ Time stamping
 Output      :      USB Communication Interface
 Connector      :      BNC
 Power Requirements      :      3× 1.5V " AA" Batteries
 Dimensions      :      170( L) × 85( W) × 30( H) mm
 Weight      :      300 grams

============================================================
 14 . Portabe Water Quality Meter
        Type : Cadmium Ion Meter

         Merk : BANTE INSTRUMENT



Specifications :
 Ion Concentration Range      :      1× 10-6~ 0.1M
 Ion Concentration Accuracy :      ± 1% Full Scale
 Selectable Units      :      ppm, mg/ L, mol/ L
 Calibration Points      :      2 to 5 points
 Calibration Solutions      :      0.001, 0.01, 0.1, 1, 10, 100, 1000, 10000ppm or mg/ L or mol/ L
 mV Range :      -1999.9~ 1999.9mV
 mV Accuracy : ± 0.2mV
 Temperature Range      :      0~ 105° C, 32~ 221° F
 Temperature Accuracy      :      ± 0.5° C, ± 0.9° F
 Temperature Calibration      :      Manual
 Temperature Compensation      :      0~ 100° C, 32~ 212° F, Automatic or Manual
 Auto-Off      :      Manual or Automatic ( 10, 20, 30 minutes after last key pressed, Selectable)
 Hold Function      :      Manual or Automatic
 Stability Conditions      :      Low or High, Selectable
 Calibration due reminder      :      0 to 30 days
 Reset Function      :      Yes
 Memory      :      500 data sets with Date/ Time stamping
 Output      :      USB Communication Interface
 Connector      :      BNC
 Power Requirements      :      3× 1.5V " AA" Batteries
 Dimensions      :      170( L) × 85( W) × 30( H) mm
 Weight      :      300 grams

============================================================
 15 . Portabe Water Quality Meter
        Type : Lead Ion Meter

         Merk : BANTE INSTRUMENT
Specifications :
 Ion Concentration Range      :      1× 10-6~ 0.1M
 Ion Concentration Accuracy      :      ± 1% Full Scale
 Selectable Units      ý      ppm, mg/ L, mol/ L
 Calibration Points      :      2 to 5 points
 Calibration Solutions      :      0.001, 0.01, 0.1, 1, 10, 100, 1000, 10000ppm or mg/ L or mol/ L
 mV Range      :      -1999.9~ 1999.9mV
 mV Accuracy      :      ± 0.2mV
 Temperature Range      :      0~ 105° C, 32~ 221° F
 Temperature Accuracy      :      ± 0.5° C, ± 0.9° F
 Temperature Calibration      :      Manual
 Temperature Compensation      :      0~ 100° C, 32~ 212° F, Automatic or Manual
 Auto-Off      :      Manual or Automatic ( 10, 20, 30 minutes after last key pressed, Selectable)
 Hold Function      :      Manual or Automatic
 Stability Conditions      :      Low or High, Selectable
 Calibration due reminder      :      0 to 30 days
 Reset Function      :      Yes
 Memory      :      500 data sets with Date/ Time stamping
 Output      :      USB Communication Interface
 Connector      :      BNC
 Power Requirements      :      3× 1.5V " AA" Batteries
 Dimensions      :      170( L) × 85( W) × 30( H) mm
 Weight      :      300 grams

============================================================
 16 . Portabe Water Quality Meter
        Type : Sulphide Ion Meter

         Merk : BANTE INSTRUMENT

Specifications :
 Ion Concentration Range      :      1× 10-7~ 1M
 Ion Concentration Accuracy      :      ± 1% Full Scale
 Selectable Units      :      ppm, mg/ L, mol/ L
 Calibration Points      :      2 to 5 points
 Calibration Solutions      :      0.001, 0.01, 0.1, 1, 10, 100, 1000, 10000ppm or mg/ L or mol/ L
 mV Range      :      -1999.9~ 1999.9mV
 mV Accuracy      :      ± 0.2mV
 Temperature Range      :      0~ 105° C, 32~ 221° F
 Temperature Accuracy      :      ± 0.5° C, ± 0.9° F
 Temperature Calibration      :      Manual
 Temperature Compensation      :      0~ 100° C, 32~ 212° F, Automatic or Manual
 Auto-Off      :      Manual or Automatic ( 10, 20, 30 minutes after last key pressed, Selectable)
 Hold Function      :      Manual or Automatic
 Stability Conditions      :      Low or High, Selectable
 Calibration due reminder      :      0 to 30 days
 Reset Function      :      Yes
 Memory      :      500 data sets with Date/ Time stamping
 Output      :      USB Communication Interface
 Connector      :      BNC
 Power Requirements      :      3× 1.5V " AA" Batteries
 Dimensions      :      170( L) × 85( W) × 30( H) mm
 Weight      :      300 grams

============================================================
 17 . Portabe Water Quality Meter
        Type : Nitrate Ion Meter

         Merk : BANTE INSTRUMENT
Specifications:
 Ion Concentration Range: 7× 10-6~ 1M

 Ion Concentration Accuracy: ± 0.5% Full Scale
 Selectable Units: ppm, mg/ L, mol/ L
 Calibration Points: 2 to 5 points
 Calibration Solutions: 0.001, 0.01, 0.1, 1, 10, 100, 1000, 10000ppm or mg/ L or mol/ L
 mV Range: -1999.9~ 1999.9mV
 mV Accuracy: ± 0.2mV
 Temperature Range: 0~ 105° C, 32~ 221° F
 Temperature Accuracy: ± 0.5° C, ± 0.9° F
 Temperature Calibration: Manual
 Temperature Compensation: 0~ 100° C, 32~ 212° F, Automatic or Manual
 Auto-Off: Manual or Automatic ( 10, 20, 30 minutes after last key pressed, Selectable)
 Hold Function: Manual or Automatic
 Stability Conditions: Low or High, Selectable
 Calibration due reminder: 0 to 30 days
 Reset Function: Yes
 Memory: 500 data sets with Date/ Time stamping
 Output: USB Communication Interface
 Connector: BNC
 Power Requirements: 3× 1.5V " AA" Batteries
 Dimensions: 170( L) × 85( W) × 30( H) mm
 Weight: 300 grams

 Accessories:
 * Nitrate Ion Selective Electrode ( Made in US)

 * TP-10K Temperature Probe
 * Storage Bottles
 * Carrying Case and " AA" Batteries

============================================================
BANTE INSTRUMENT INDONESIA
DISTRIBUTOR BANTE INSTRUMENT JAKARTA 
BANTE INSTRUMENT READY STOCK
HARGA BANTE INSTRUMENT
========================================== 
BINTANG INSTRUMENT - HP : 081362449440
==========================================









============================================================
 18. Water Proof DO Meter pen
        Type : 7031

         Merk : EZDO
Specifications:
 * DO ( DISSOLVED OXYGEN ) .
 Range : 0~ 20.00mg/ L
 Accuracy : ï ¿ ½ 0.2 + 1digit
 Resolution : 0.01

 * O2.
 Range : 0~ 200%
 Accuracy : ï ¿ ½ 2% FS
 Resolution : 0.1

 * Temperature ( Suhu ) .
 Range : 0~ 90.0 C
 Accuracy : 0.2+ 1 digit.
 Resolution : 0.1.

 * ATC      : 0~ 50 C
 * MSC      : 0~ 50 ppt
 * MAC      : 0-20000 ft
 * Calibration: 100% in air
 * Power : DC1.5V x 4 battery size: AAA/ UM-4
 * Dimensions : Meter: 195 x 40 x 36 mm, Kits: 230 x 205 x 50 mm
 * Weight : Meter, 135g( with battery) , Kits: 780g

 Feature:
 1. Microprocessor based for fast and accurate measurements.
 2. Special viewing angle designed of waterproof housing IP 57 rated. It floats on water.
 3. Large LCD display pH or ORP or Conductivity or TDS or Salinity or DO or FCL and Temperature Simultaneously.
 4. Simple to calibrate by one keyboard and automatic temperature compensation( ATC) , Manual Salinity( MSC) and Altitude( MAC) Compensation.
 5. Multi-functions with Data-hold, Max/ Min and shows PTS after calibration. Degree C/ F are switchable.
 6. Low battery and consumption indicator. Auto power shut off after 10 minutes of non use.
 7. Easy to replace electrode module and the type of electrode would be recognized automatically and shown in display during insertion.

============================================================
 19. pH Meter pen
       Type : 5011 A

       Merk : EZDO
Spesification:

 pH: 0 to 14.
 ACCURACY: ± 0, 1+ 1digit.
 RESOLUTION: 0.1
 ATC: YES
 POWER: 1.5Vx3( or 9V) .
 SIZE: 158x40x34mm ; CARRING CASE : 165x100x40mm
 WEIGHT: 85g( w/ bettery) ; COMPLETE KIT: 250g( average) .


============================================================
 20.  Multi Paramter
        Type : CyberScan PD300
         Brand : Eutech
 Specifications:
 pH Range      -2.00 to 16.00 pH
 Resolution & Accuracy      0.01 pH & ± 0.01 pH
 Dissolved Oxygen Range      0 to 19.9 mg/ l or ppm
 Resolution & Accuracy      0.01 mg/ l, 0.1 ppm & ± 1.5% Full Scale
 % Saturation of Oxygen      0.0 to 199.9 %
 Resolution & Accuracy      0.1 % & ± 1.5% Full Scale
 Temperature Range      -10.0 to 110.0 ° C
 Resolution & Accuracy      0.1 ° C & ± 0.3 ° C
 Salinity Correction      0.0 to 50.0 ppt
 Barometric Pressure Correction      500 to 1499 mm Hg or 66.6 to 199.9 kPA
 Method      Manual input for Automatic correction
 No. of pH Calibration Points      Up to 5 points ( pH 1.68, 4.01, 7.00, 10.01 & 12.45)
 No. of DO Calibration Points      Up to 2 points; 100% in air and/ or
 0% in known solution
 Temperature Compensation      Automatic / manual ( 0 to 100 ° C)
 Special Functions      Stability Indicator; Self-diagnostic;
 Electrode characteristics; Back-lit Display;
 Hold & Auto-Power Off after20 minutes
 Power      4 ' AAA' x 1.4V batteries

============================================================
 21.  Water Proof pH meter
        Type : pH tester 30
         Brand : Eutech









pH Range           : -1.00 to 15.00
Resolution          : 0.01 pH Accuracy        :            0.01 pH Operation Temp. : 0 to 50 0C Calibration          : 3 points
Battery life         : > 500 hours (4 x 1.5 V, micro alkaline batteries)
Temperature Display : 0 – 50 0 C or 32.0 – 122.0 0 F


============================================================
 22.  Water Quality Multi Parameter
        Type : DO 700
         Brand : Eutech




Specifications
 Dissolved Oxygen Concentration: 0 to 40.00mg/ L; Saturation: 0 to 200.0%
 pH -2.00 to 19.99pH
 mV -1999 to + 1999mV
 Conductivity 0.00 to 199.9mS
 TDS 0 to 100g/ L
 Salinity 0 to 100ppt
 Resistivity 0 to 100M© Å cm
 Temperature 32 to 212° F ( 0 to 100° C) , pH and mV
 32 to 122° F ( 0 to 50° C) , all other ranges
 Resolution 0.01m/ gL, 0.1% , 0.01pH, 1mV, 0.01¼ S, 0.1°
 Accuracy ± 0.02pH; ± 0.15mV; ± 1.5% FS; ± 1° F/ ± 0.5° C
 Power Two AA batteries
 Dimension Meter: 4.7 x 2.6 x 1.2" ( 120 x 65 x 31mm)
 Kit: 14 x 10.75 x 3” ( 355.6 x 273 x 76.2mm)
 Weight Meter: 6.3oz ( 180g)
 Kit: 3.75lbs ( 1.7kg)

============================================================
 23.  Ammonia meter
       



Ammonia ( Medium Range)
 Type : Mi405
 Merk : Martini Instruments

 Specifications :
 Range      0.00 to 9.99 mg/ l ( NH3-N)
 Resolution      0.01 mg/ l
 Accuracy      ± 0.10 mg/ l @ 5.00 mg/ l
 Method      adaptation of Nessler method
 Sorgente luminosa      Blue LED 466 nm
 Light Detector      silicon photocell and 466 nm narrow band interference filter
 Environment      0 to 50° C / 32 to 122° F; max RH 100%
 Battery Type      1 x 9V ( included)
 Auto-off      after 10 minutes of non-use
 Dimensions      192 x 104 x 52 mm
 Weight      380 g
 .
 .
 .
 ..
 Ammonia ( Low Range)
 Type : Mi407
 Merk : Martini Instruments

 Specifications :
 Ammonia Range      0.00 to 3.00 mg/ l ( NH3-N)
 Ammonia Resolution      0.01 mg/ l
 Ammonia Accuracy      ± 0.04 mg/ l @ 1.50 mg/ l
 Method      adaptation of Nessler method
 Light Source      Blu LED 466 nm
 Light Detector      silicon photocell and 466 nm narrow band interference filter
 Environment      0 to 50° C / 32 to 122° F; max RH 100%
 Battery Type      1 x 9V ( included)
 Auto-off      after 10 minutes of non-use
 Dimensions      192 x 104 x 52 mm
 Weight      380 g
 .
 .
 .
 .
 High Range Iron Photometer
 Type : MI408 Merk : Martini Instruments

 Specifications :
 Range      0.00 to 5.00 mg/ L Fe
 Resolution      0.01 mg/ L
 Accuracy      ± 0.03 mg/ L @ 1.50 mg/ L
 Method      adaptation of the USEPA method 315 B and Standard method 3500 - Fe B
 Light Source      tungsten lamp
 Light Detector      silicon photocell and 525 nm narrow band interference filter
 Environment      0 to 50° C / 32 to 122° F; max. RH 100%
 Battery      Type      9V alkaline ( included)
 Auto-off      after 10 minutes of non use
 Physical
 Specs      Dimensions      192 x 104 x 52 mm
 Weight      380g

============================================================
 24.  DO METER
        Type : MW 600
         Brand : MILWAUKE



 Specification:
 OVER VIEW: Simple to use, low cost, Dissolved Oxygen meter.FEATURES: * Manual calibration* Faster Processor with The New Chipset and Motherboard* 100% Larger & Easier To Read LED Display* Smaller, Ergonomic & Lighter Case Design* Easier & Faster To Calibrate* Longer Battery Life* Open Air Calibration Procedure ( see Tech Tips) SPECIFICATIONS: - Range: ( ppm / mg/ L) 0.0-19.0mg/ L- Resolution: 0.1 ( ppm / mg/ L) - Accuracy: ± 1.5% Full Scale- ATC: Not Available- Calibration: 2 Points - Manual- Environment: 32 - 122F- Battery Type: 9v

============================================================
 25.  BENCHTOP WATER QUALITY MULTI PARAMETER
        MODEL : 8 in 1
       



Specification :

 * pH meter
 - Range : -2.00~ 16.00 pH
 - Accuracy : ± 0.01+ 1 digit
 - Resolution : 0.01 pH
 - Compensation : ATC: 0~ 100

 * ORP meter
 - Range : -1999 ~ -200 mV
 -199.9 ~ 499.9 mV
 500 ~ 2000 mV
 - Accuracy : ± 2+ 1 digit
 - Resolution : 0.1/ 1 mV
 - Compensation : N/ A

 * Conductivity meter
 - Range : 0.0~ 199.9¼ S
 200~ 1999¼ S
 2.00~ 19.99 mS
 20.0~ 100.0 mS
 - Accuracy : ± 2% FS
 - Resolution : 0.1/ 1¼ S/ 0.01/ 0.1 mS
 - Compensation : ATC: 0~ 60

 * TDS meter
 - Range : 0.0~ 131.9 ppm
 132~ 1319 ppm
 1.32~ 13.19 ppt
 13.2~ 66.0 ppt
 - Accuracy : ± 2% FS
 - Resolution : 0.1/ 1ppm/ 0.01/ 0.1ppt
 - Compensation : ATC: 0~ 60

 * Salinity meter
 - Range : 0.0~ 99.9 ppm
 100~ 999 ppm
 1.00~ 9.99 ppt
 10.0~ 50.0 ppt
 - Accuracy : ± 2% FS
 - Resolution : 0.1/ 1ppm/ 0.01/ 0.1ppt
 - Compensation : ATC: 0~ 60

 * DO meter
 - Range : 0~ 20.00 mg/ L
 0~ 20.00 ppm
 - Accuracy : ± 0.2+ 1 digit
 - Resolution : 0.01 mg/ L
 - Compensation : ATC: 0~ 50
 MSC: 0~ 50 ppt
 MAC: 0-20000 ft

 * O2 meter
 - Range : 0~ 200.0 %
 - Accuracy : ± 2% FS
 - Resolution : 0.10%
 - Compensation : -

 * Temperature
 - Range : 0~ 110
 - Accuracy : ± 0.2+ 1 digit
 - Resolution : 0.1
 - Compensation : -

 * Accessories For Completer Kit :
 - pH glass electrode
 - Conductivity cell
 - DO probe
 - Temp. probe
 - Membrane cap x 2 pcs
 - Electrolyte x 20 ml
 - Standard solution
 - Electrode holder
 - Software and USB cable
 - DC/ AC adaptor
 - instruction manual
 - Gift box
 - Optional: Stirrer

 Features:

 * Microprocessor based designed, and rugged housing with splash proof keyboard.
 * The large backlight LCD displays pH or ORP or Conductivity or DO and Temperature simultaneously.
 * Automatic Temperature Compensation( ATC) , Manual Salinity( MSC) and Altitude( MAC) Compensation.
 * Memory function stores and recalls up to 150 points. MAX/ MIN and data Lock. Degree /      are switchable.
 * Combine special platform and electrode holder, or stirrer( Optional) for measuring convenient.
 * The TDS value is determined by multiplying a conductivity reading by a known ratio in the range of 0.50 to 1.00.
 * Output data for capturing on PC directly via USB.

============================================================
 26.  TURBIDITY METER
        MODEL : MI 415



Specification: The cloudy appearance of water ( called Turbidity) is caused by suspended material. The unit of measure adopted by the ISO Standard is the FNU ( Formazine Nephelometric Unit) and by EPA is NTU ( Nephelometric Turbidity Unit) . The other two methods used to test for turbidity and their measurement units are the JTU ( Jackson Turbidity Unit) and the Silica unit ( mg/ L SiO2) .See the conversion table of these methods and their units for your reference

 Specification :  

 Range : 0.00 to 50.00 FNU; 50 to 1000 FNU
 Resolution : 0.01 FNU; 1 FNU
 Accuracy : ± 0.5 FNU or ± 5% of reading, whichever is greater
 Method : detection of scattered light
 Light Source : high emission infrared LED
 Light Detector : silicon photocell
 Environment : 0 to 50° C / 32 to 122° F; max RH 100%  
 Battery Type : 1 x 9V
 Auto-off : after 5 minutes of non-use
 Dimensions : 192 x 104 x 52 mm
 Weight : 380 g


============================================================
 27.  TURBIDITY METER
        MODEL : TUB-430 
Specification :
 * Range : 0-19.99 NTU
 20.0 to 199.9 NTU
 200 to 1000 NTU
 * Resolution : 0.01/ 0.1/ 1 NTU
 * Accracy : ± 3% of Reading + 1 digital at 500NTU
 * Response : < 10 seconds
 * Operating : 0 ~ 50 < 85% RH
 * Sample : 10 ml
 * Data memory : Storage / Recall up to 150 points
 * Power : DC 1.5V ( UM4, AAA ) Battery x 4pcs
 * Dimension / Size : 70x135x65 mm
 * Weight : 168 gr ( including battery )

 * Standard Accessories :
 - Standard solution set
 - Testing Bottle x 2
 - Battery
 - Clean Cloth
 - Cup
 - Distilled Water
 - Manual Book
 - Carrying Case

 * Features :
 - Microprocessor based for fast and accurate measurement
 - Measurement method meet ISO 7072
 - Large LCD : 45x25 mm display for reading convenlent
 - Unit NTU, FTU, EBC are changeable
 - Memory function stores and recalls up to 150 points
 - Low Battery alarm and auto shut of after 10 minutes of non use.

============================================================
 28.  TSS METER
        MODEL : 740
        Merk : Partech - UK





















Specification :
Wavelength : 880 nm
Pressure rating : 10 mWC
Max Range : 0 ~ 20, 000 mg/ l
Min Range : 0 ~ 50 mg/ l
Response time : 0, 5 seconds, damped by monitor
Accuracy : ± 5% FSD on real sample
Display : Graphical Display providing 1 1/ 2 digit
Setup : Via 4 Button Membrane Keypad
Unit measurement : mg/ l, g/ l, ppm, NTU, FTU, % SS,
User Defined
Size : 224 x 106 x 39 mm ( unit)
: 45mm Dia x 155 mm Long ( sensor)
: 5mtr cable ( standard)





























============================================================
 29.  TSS METER
        MODEL : LXV322.99.00002
       





Specifications:

Measurment Principle
Combined multi-beam alternating light method with infrared
diode system IW
Turbidity: 2-channel 90ï ¿ ½ scattered light measurement in
accordance with DIN EN 27027/ ISO 7027; additional
measured value verification by six-channel multiple angle E
measurement
Suspended Solids: modified absorbance measurement, six-channel multiple angle measurement

Range
Turbidity: 0.001 to 4000 NTU
Suspended Solids: 0.001 to 400 g/ L ( 1 to 400, 000 mg/ L) ( upper range depending on sample characteristics)

Accuracy
Turbidity: less than 3% or ï ¿ ½ 0.02 NTU, whichever is greater Suspended Solids: less than 4% or ï ¿ ½ 0.001 g/ L whichever is greater

Resolution
Turbidity: 0.001 at 0 to 0.999 NTU; 0.01 at 1 to 9.99 NTU;
0.1 at 10 to 99.9 NTU; 1 at greater than 100 NTU
Suspended Solids: 0.001 at 0 to 0.999 g/ L; 0.01 at
1 to 9.99 g/ L; 0.1 at 10 to 99.9 g/ L; 1 at greater than 100 g/ L

Units of Measure
Turbidity: NTU, FNU, EBC
Suspended Solids: ppm, mg/ L, g/ L, %
Operating Modes
Single, interval, or continuous measurement

Display
24 mm ( 0.95 in.) high LCD graphic display; UV treated; alphanumeric 4 lines of 16 characters each

Operating Temperature
0 to 60ï ¿ ½ C ( 32 to 140ï ¿ ½ F)

Operating Pressure
0 to 10 bar ( 0 to 145 psi)

Relative Humidity
0 to 95% relative humidity

Power Requirements
Meter: 6 rechargeable NiMH batteries
( recommended 1.2 V/ min. 1800 mAH) or
6 ï ¿ ½ AAï ¿ ½ standard batteries
Plug-in Charger: 115/ 230 Vac, 50/ 60 Hz

Sensor Cable Length
10 m ( 32.8 ft.)

Meter Enclosure Rating
IP55
Probe Enclosure Rating
IP68

Current Input
Approx. 60 mA

Wetted Materials Probe: stainless steel Sensor Window: sapphire

Internal Data Memory
For up to 290 measured values

Weight
Meter: 0.6 kg ( 1.2 lb.)
Probe: 1.6 kg ( 3.5 lb.)

Dimensions
Meter: 110 x 230 x 40 mm
( 4.3 x 9.1 x 1.6 in.)
Probe: 290 x 40 mm ( 11.4 x 1.6 in.)
Case: 320 x 450 x 110 mm
( 12.6 x 17.7 x 4.3 in.)

============================================================
 30.  TSS METER
        MODEL : 711
        Merk : Royce


 * Range: 0 - 10 grams per liter ( o to 10, 000 mg/ l)
 * Readout Device: Harsh environment, 1/ 2” LCD digital display
 * Input Power: Standard 9V battery
 * Enclosure: Waterproof
 * Size: 7 inches long 3.2 inches wide 1.5 inches deep
 * Weight: 1.5 pounds ( .68 kgms)
 * Type: Single Gap, Optical
 * Accuracy: ± 5% of reading or ± 100 mg/ l, whichever
 is greater
 * Repeatability: ± 1% of reading or ± 20 mg/ l, whichever is
 greater
 * Range: 0 - 10 g/ l
 * Operating Limits: Temperature, 0 - 65O C
 Pressure, o - 50 PSIG.
 * Size: 4 inches long
 2 inches diameter
 * Weight: 1 pound ( .45 kgms)
 * Construction: Polyurethane body
 Optical grade ploymer lenses


============================================================
 31.  AMMONIA METER       


 - HI-93700
     LOW RANGE
 .
 .Spesifications :
 Ammonia is often an excellent indication of the presence of animal or plant microbiological decay. It is tested in fish farms ( fresh and salt water tanks) due to the damaging effects of its toxic nature. Its presence in rivers and reservoirs normally points to agricultural and/ or civil pollutants. Ammonia is tested in lakes, rivers, potable water, boiler feed water, sewage, industrial and waste water. The HI-93700 measures from 0.00 to 3.00 mg/ L
 For the full product specification and accessories required please see the attached instruction manual. The HI-93700 is supplied complete with 2 sample cuvets, battery and instruction manual.
 Reagents NOT included.

 Product Specification Summary

 * Range: 0.00 to 3.00 mg/ L
 * Accuracy: + / -0.04mg/ L + / -4% of reading
 * Method: Adaptation of the ASTM Manual of Water and Environmental Technology, D1426-92, Nessler method.
 * Light source: LED ( Light Emitting Diode)
 * Auto Off: After 10 minutes of non-use
 * Power supply: Battery Type/ Life ( 1) 9V / approx. 40 hours of continuous use.
 * Dimensions: 180 x 83 x 46mm ( 7.1 x 3.3 x 1.8" )
 * Weight: 290g ( 10 oz)
 .
 .
 - HI -96715
     MEDIUM RANGE
 .
 .Spesifications :
 * Range           0.00 to 9.99 mg/ L ( ppm)
 * Resolution           0.01 mg/ L ( ppm)
 * Accuracy           ± 0.05 mg/ L ± 5% of reading @ 25° C
 * Light Detector           Silicon Photocell with narrow band interference filter @ 466 nm
 * Light Source           Light Emitting Diode
 * Environment           0 to 50° C ( 32 to 122° F) ; Max 95% RH non-condensing
 * Battery Type           9V
 Auto Shut-off           after ten minutes of non-use in measurement mode; after one hour of non-use in calibration mode; with last reading reminder
 * Dimensions           192 x 104 x 69 mm ( 7.6 x 4.1 x 2.7" )
 * Weight           360 g ( 12.7 oz.)
 * Method           adaptation of the ASTM
 .
 .- HI 96733
    High Range
 .
 .Spesifications :
 * Range           0.0 to 50.0 mg/ L ( ppm)
 * Resolution           0.1 mg/ L
 * Accuracy           ± 0.5 mg/ L ± 5% of reading @ 25° C
 * Light Source           Tungsten Lamp
 * Light Detection           silicon photocell with narrow band interference filter @ 420 nm
 * Power Supply           9V battery
 * Environment           0 to 50° C ( 32 to 122° F) ; RH max 95% non-condensing
 * Dimensions           192 x 104 x 69 mm ( 7.6 x 4.1 x 2.7" )
 * Weight           360 g ( 12.7 oz.)

============================================================
 32.  a) DO METER 
             Model : AZ 8401       






 Specifications

 Dissolve Oxygen D.O. Measurement
 Range: 0~ 199.9% / 0~ 19.99 PPM / 0~ 19.99 mg/ I
 Accuracy: ± 1.5% F.S
 Resolution: 0.1% / 0.01 PPM / 0.01 mg/ I
 Temperature Measurement
 Range: 0~ 50 ° C
 Accuracy: ± 0.3 ° C
 Resolution: 0.1 ° C
 Salinity Measurement
 Range: 0.0~ 50.0 ppt
 Resolution: 0.1 ppt
 Barometric Pressure: 500~ 1499 mmHg / 66.6~ 199.9 KPa
 Pressure Resolution: 1 mmHg / 0.1 KPa
 Adjustable Coefficient of membrane
 99 Memory
 Real Time / Recall included
 IRDA Port Included
 LCD size : ( h) 44 mm x ( W) 26 mm
 Operating Temperature : 0~ 50 ° C
 Humidity < 80%
 Storage Temperature : 0~ 60 ° C
 Humidity 6 months ( with good maintenance )
 Dimension: ( h) 175 mm x ( W) 70 mm x ( h) 33 mm
 Weight of D.O. Meter : 150g ( without battery )
 Weight of whole set: 1075g
 Battery: AAA x 4pcs

32. b)   Do Meter
             Model : AZ 8402


SPECIFICATION
D.O %: 0.0 ~ 199.9%
RES.: 0.10%
Accuracy: ±1.5% of F.S
D.O. ppm: 0.00 ~ 19.99ppm
RES.: 0.01ppm
Accuracy: ±1.5% of F.S
TEMP.: 0~30,0~50(8402/8403)
RES.: 0.1
ACCURACY: ±5,±3(8402/8403)
SALINITY: 0.0 ~ 50.0 ppt (8402/8403)
RES.: 0.1ppt
PRESSURE.: 500~1499mmHg/L 66.6~199.9kPA(8402/8403)
RES.: 1mmHg/0.1kPA
RS232: YES(8401/8402/8403)

============================================================
 33.  Water Quality Multi Parameter                   
         Model : 5 in 1


Specification :
* - pH Range : 2.00 - 12.00
- pH Accuracy : + / - 0.1
- pH Resolution : 0.01

* - Conductivity Range : 0 - 199.9 , 0 - 1999u S/ cm ; 0 - 19.99, 0 - 69.9 mS/ cm
- Cond Accuracy + / - 1% F.S + / - Digit
- Cond Resolution : 0.1uS/ m, 1uuS/ cm; 0.01 mS/ cm, 0.1 mS/ cm

* - Salinity Range : 0-10.00 ppt ; n0-42.0 ppt ( Sea Water )
- Salinity Accuracy : + / - % F.S + / - 1 Digit
- Salinity Resolution : 0.01 ppt, 0.1 ppt

* - DO Range : 0.0 - 19.9% ( 0.0-30.0 mg/ L )
- Do Accuracy : + / - 3% of F.S + 1 Digit
- Do Resolution : 0.1

* - Temperature Range : 0-60.0 C
- Temp Accuracy : + / - 0.5C
- Temp Resolution : 0.1

* Compatible probe : pH Probe, Cond. Probe and Do. Probe could be all used on one meter at the same time

* LCD size ( mm ) 32.5 ( H ) x54 ( W )
* Operaing temperature & RH % : -50 C , Humidity < 80%
* Storage tempereture & RH % : 0-60, Humidity < 90 %
Dimension L x W x H ( mm ) : 169x78.3x43.3 mm
* Weight : 200gr
Power : 6pcs AAA Batteries
* Standard Package : meter / pH probe/ Cond Probe / Manual Carry case / Cable Clip / Battery

* Large LCD with multiple parameters display simultaneously:
* PH, Conductivity or Salinity, Dissolved oxygen & Temperature
* Handheld fashion housing with IP67 waterproof design
* Auto temperature compensation
* Auto ranging for conductivity measurement
* Multiple points calibration: 3 points for pH, 1point for D.O.,
* 4 points for conductivity
* Manually altitude/ salinity compensation for D.O. measurement
* 99 points memories w/ recall function
* 1 hour auto power off


============================================================
 34.  Benchtop Water Quality Multi Parameter                   
         Model : 86505
        Merk : AZ Instrument




Multi display ph/ mv or cond. or tds or salt with temp. & real time stamped
 Auto or manual range for conductivity, tds and salinity measurement
 Collect data via rs232 by linking with a pc
 Automatic buffer recognition to avoid errors during calibration
 Mmaximum 5 points calibration ( ph, cond, tds)
 Hold record reading

 PH range: 0.00 to 14.00 / resolution 0.01pH / accuracy ± 0.01pH

 Conductivity range: 0-19.99, 0-199.9, 0-1999 uS/ cm

 0-19.99 mS/ cm, 0-199.9 mS/ cm

 mV range: -1999 to + 1999 mV / resolution 0.1mV / Accuracy ± 0.2 mV

 TDS range: 0.00 – 19.99 ppm, 0.0-199.9 ppm, 0-1999 ppm, 0.1-199.9 ppt

 Temperature: -5 to 80° C

 Standard packing and accessories:

 Operation manual, AC adaptor, pH / Cond. Electrode and electrode stand

============================================================
 35.  Water Quality Multi Parameter                   
        Model : 8602
        Merk : AZ Instrument

Specification :
 * - pH Range : 2.00 - 12.00
 - pH Accuracy : + / - 0.1
 - pH Resolution : 0.01

 * - Conductivity Range : 0 - 199.9 , 0 - 1999u S/ cm ; 0 - 19.99, 0 - 69.9 mS/ cm
 - Cond Accuracy + / - 1% F.S + / - Digit
 - Cond Resolution : 0.1uS/ m, 1uuS/ cm; 0.01 mS/ cm, 0.1 mS/ cm

 * - Salinity Range : 0-10.00 ppt ; n0-42.0 ppt ( Sea Water )
 - Salinity Accuracy : + / - % F.S + / - 1 Digit
 - Salinity Resolution : 0.01 ppt, 0.1 ppt

 * - DO Range : 0.0 - 19.9% ( 0.0-30.0 mg/ L )
 - Do Accuracy : + / - 3% of F.S + 1 Digit
 - Do Resolution : 0.1

 * - Temperature Range : 0-60.0 C
 - Temp Accuracy : + / - 0.5C
 - Temp Resolution : 0.1

 * Compatible probe : pH Probe, Cond. Probe and Do. Probe could be Used on same meter in turns

 * LCD size ( mm ) 32.5 ( H ) x54 ( W )
 * Operaing temperature & RH % : -50 C , Humidity < 80%
 * Storage tempereture & RH % : 0-60, Humidity < 90 %
 Dimension L x W x H ( mm ) : 169x78.3x43.3 mm
 * Weight : 200gr
 * Power : 4 pcs AAA Batteries

 * Large LCD with multiple parameters measurement in one meter
 * Easily measure pH/ Conductivity or salinity/ Dissolved oxygen in
 one meter by using different probes in turns
 * Handheld fashion housing with IP67 waterproof design
 * Auto temperature compensation
 * Auto ranging for conductivity measurement
 * Manually altitude & salinity compensation for D.O. measurement
 * 99 points memories w/ recall function
 * Low cost replacement probe
 * 1 hour auto power off

============================================================
 36.  DO meter                 
         Model : 550A
         Merk : YSI



 Specifications :
 The rugged, waterproof YSI 550A measures dissolved oxygen and temperature simultaneously using polarographic technology and YSI Temperature Precision™ thermistors. The new PE membranes allow for faster response times with less stirring dependence. Measurements are fast and easy with one-handed operation, easy-to-use backlit display, automatic push-button calibration, and a weighted, quick-sinking probe.

 Other features include field-replaceable DO electrode modules, waterproof housing ( meets IP-67 specifications) , impact-resistant case, 2, 000+ hours battery life, screw-on cap membranes, calibration in either mg/ L or % saturation, user-selectable temperature units ( ° C or ° F) , a built-in calibration chamber, low-battery indicator, and direct compensation for salinity, temperature, and altitude. CE compliant. Available with 12-, 25-, or 50-foot cable lengths. Three-year warranty on the instrument. One-year warranty on the DO module. Powered by 4 C cell Batteries.

 Specifications:
 Range: Dissolved Oxygen: 0% to 500% air saturation; 0 to 50 mg/ L; -5º C to 45º C; Temperature: -5º C to 45º C.
 Resolution: Dissolved Oxygen: 0.1% air saturation or 1% selectable; 0.01 mg/ L or 0.1 mg/ L selectable; 0.1º C; Temperature: 0.1º C.
 Accuracy: Dissolved Oxygen: 0% to 200% : ± 2% air sat. or ± 2% of reading, whichever is greater; 200% to 500% : ± 6% of reading; 0 to 20 mg/ L; ± 0.3 mg/ L or ± 2% of reading, whichever is greater; 20 to 50 mg/ L: ± 6% of reading; ± 0.3º C; Temperature: ± 0.3º C.
 Salinity Compensation: Yes.
 Altitude Compensation: Yes.
 Temperature Compensation: Automatic.
 Battery Life: Over 2, 000 hours.


============================================================
 37.  pH meter                
        Model : pH100A
         Merk : YSI


Specifications :
 pH100A Instrument General Specifications
 ATC Probe      Thermistor, 10k© / 25° C
 Audio feedback      Yes, all keys
 Autolock feature      Yes
 Battery      One 9 volt included with purchase, 1000 hours
 Calibration back-up      Yes
 Dimensions      Size      78 mm width x 184 mm length ( 3.1 in. x 7.25 in.)
 Weight      272 grams ( 0.6 lb) with battery
 Operating range      Relative Humidity      up to 95%
 Temperature      0° to 50° C
 pH buffer recognition      ( 4.01, 7.00, & 10.01) or ( 4.00, 6.86, & 9.18)
 pH calibration temperature      0° C to 60° C
 pH oý set recognition      + 90 mV at pH 7.00 or 6.86
 pH slope recognition      + 30% at pH 4.00, 4.01, 9.18, or 10.01
 pH temp compensation      Auto/ Manual -10.0° C to 120.0° C
 Warranty      1-year instrument and 6-month electrode
 Waterproof      IP67 waterproof rating
 Memory      50 data set reviewable memory

============================================================
 38.  Handheld Conductivity Meter               
        Model :EC300A
         Merk : YSI




EC300A Instrument General Specifications
Audio feedback Yes, all keys
Battery One 9 volt included with purchase
Battery Life 500 hours
Calibration back-up Yes
Cell Constant Default 5.00
Cell Constant Range 4.50 to 5.50
Conductivity Range 0.0 µS to 200 mS, with auto ranging
Dimensions Size 78 mm width x 184 mm length (3.1 in. x 7.25 in.)
Weight 272 grams (0.6 lb) with battery
Operating range Relative Humidity up to 95%
Temperature 0° to 50° C
Reference Temperature 15.0 to 25.0 °C
Temperature Coefficient 0.0% to 4.0%
Temperature Sensor Thermistor, 10K at 25 °C
Warranty 1-year instrument and electrode
Waterproof IP67 waterproof rating
Memory 50 data set reviewable memory

EC300A System Specifications

 Range Accuracy Resolution
Conductivity 0 to 499.9 µS/cm ± (1% of reading + 2 µS/cm) 0.1 µS/cm
0 to 4999 µS/cm ± (1% of reading + 5 µS/cm) 1 µS/cm
0 to 49.99 mS/cm ± (1% of reading + 0.05 mS/cm) 0.01 mS/cm
0 to 200.0 mS/cm ± (2.5% of reading + 0.5 mS/cm) 0.1 mS/cm
Salinity 0.0 to 70.0 ppt, calculated ±0.2% FS 0.1 ppt
TDS
(Total
Dissolved Solids)		 TDS in g/L calculated; enter constant values from 0.30 to 1.00, default value 0.65
Temperature -10 to +90°C (14 to 194°F) ±0.2°C or  ±0.4%,
whichever is greater		 0.1°C

============================================================
 39.  Water Quality Multi Parameter                
        Model : YSI PROF Plus
         Merk : YSI




YSI Professional Series Professional Plus Instrument
 Offering the ultimate in versatility, the Professional Plus can accommodate any cable and corresponding probe combination. Just select the cable length and appropriate probe or probes you need, and then determine which measurements you want to be displayed. Choose from the following probes: dissolved oxygen ( galvanic or polarographic probe) , pH, ORP, ph/ ORP combination, ammonium, chloride, and nitrate. Single probe and dual probe cables are available. All cables provide temperature measurements with no temperature probe needed. Cables offering conductivity measurement capability require no additional conductivity probe since the probe is built-in with the cable.

 The Professional Plus offers interval or single event logging and features a 2, 000 data-set memory with additional GLP event logging. This instrument can even log data and then download it to a PC using Data Manager software ( included) . A graphic display provides detailed messages and instructions, and both the display and keypad are backlit. The rubber over-molded case features an IP-67 waterproof rating. Software, communication dock, and USB cable included. Order the instrument, cables, and probes separately below.

 Note: All cable assemblies have temperature sensors built in ( except for the Quatro which includes a temperature/ conductivity probe) . Cable assemblies for conductivity have a built-in conductivity sensor. No additional probe is necessary.

 Cables Choose either a specialized cable or a Quatro cable. The Quatro is a 4-port cable and bulkhead that holds four user-replaceable probes for temperature/ conductivity, dissolved oxygen ( either polarographic or galvanic) and your choice of any two ISE’ s from among pH, ORP, ammonium, nitrate, or chloride. Each Quatro cable includes a temperature/ conductivity probend a cable management kit. Other probes sold separately.

============================================================
 40.  Disolved Oxygen Meter                
         Model : YSI Pro20
         Merk : YSI


 Specification :

 *      Dissolved Oxygen ( % )
 Sensor Type : Polarographic or Galvanic
 Range : 0 to 500% air saturation
 Accuracy : 0 to 200% air saturation, ± 2% of the reading or  ± 2% air saturation,           whichever is greater; 200 to 500% air saturation, ± 6% of the reading
 Resolution : 0.1% or 1% air saturation ( user selectable)

 *      Dissolved Oxygen ( mg/ L)
 Sensor Type : Polarographic or Galvanic
 Range : 0 to 50 mg/ L
 Accuracy : 0 to 20 mg/ L, ± 2% of the reading or  ± 0.2 mg/ L, whichever is greater;     20 to 50 mg/ L, ± 6% of the reading
 Resolution : 0.01 or 0.1 mg/ L ( user selectable)

 *      Temperature
 " Range : -5 to 55° C
 ( 0 to 45° C; DO compensation range for mg/ L ) "
 Accuracy : ± 0.2° C ( ± 0.3° C cables over 45-meters)
 Resolution : 0.1° C

 *      Barometer
 Range : 400 to 999.9 mmHg
 Accuracy : ± 5 mm Hg within ± 5° C temperature range from calibration point
 Resolution : 0.1 mm Hg

 Pro20 Instrument General Specifications
 Barometer      Built-in barometer
 Cable Lengths*      1- 4- 10- 20- 30- and 100-m lengths ( special order up to 100-m)
 ( 3.28, 13.1, 32.8, 65.6, 98 ft.)
 Certifications      RoHS, CE, WEEE, IP-67, 1-meter drop test
 Connector      MS ( military spec) waterproof with bayonet lock
 Data Memory      50 data sets
 Dimensions      8.3 cm width x 21.6 cm length x 5.6 cm depth ( 3.25 in x 8.5 in x 2.21 in)
 Languages      English, Spanish, German, French
 Power      2 alkaline C-cells providing 450 hours of battery life;
 low battery indicator
 Salinity Input Range      0-70 ppt; manual ( automatically compensates for manual input value)
 Warranty      3-year instrument; 2-year cable; 1-year Polarographic sensors; 6-months Galvanic sensors
 Waterproof      IP-67 ( even with the battery cover off)
 Weight with Batteries      475 grams ( 1.05 lbs)
 * Special order cable lengths up to 100-meters in 10-meter increments available.























 ========================================================
41.  WATER QUALITY MULTI PARAMETER
        Type : Professional Plus
        Merk : YSI
        Fungsi : Alat uji kualiatas air dengan menggunakan satu alat untuk berbagai parameter pengujian air.

Specification :
Professional Plus Instrument General Specifications
Auto Stable User-defined auto-stable function holds stable readings on display when criteria is met
Barometer Built-in barometer
Buffer Recognition Auto buffer recognition for US and NIST buffers
Certifications RoHS, CE, WEEE, C-Tick, VCCI, FCC, IP-67, 1-meter drop test, Assembled in USA
Connectivity USB 2.0; ProComm II communications saddle and USB cable included; user-upgradeable software via USB and website
Connector MS (military spec) waterproof with bayonet lock
Data Management Data Manager desktop software included; 100 user-defined folders and site names
Minimum PC requirements;
  • Windows 2000 with SP4 (minimum) or XP with SP2 (minimum)
  • 300 MHz or higher Pentium-compatible CPU
  • 128 MB of RAM or higher
  • 80 MB or more of free hard-disk space
  • USB 2.0
  • Microsoft.NET (installed with Data Manager)
Data Memory 5,000 data sets (data, date, time, user-defined info); 100 GLP files
Dimensions 8.3 cm width x 21.6 cm length x 5.6 cm depth (3.25 in x 8.5 in x 2.21 in)
Display Graphic display with detailed Help; backlit display AND keypad
DO Membrane Response Times
(T95; 100%-0) and Flow Dependence		 1.25 mil PE = 8 seconds and 6 in/sec flow
2.0 mil PE = 17 seconds and 3 in/sec flow
1 mil Tefl on® = 18 seconds and 12 in/sec flow
DO Sensors Polarographic or galvanic field sensors; self-stirring polarographic BOD sensor for the lab
Field Cables Standard lengths of 1, 4, 10, 20, or 30 meters - up to 100 meters on DO only cables;  4- through 30-meter cables include a cable management kit
Flow Cell Single, dual and multiparameter Quatro cable all flow cell compatible
GLP Compliance Yes; detailed GLP information is stored and is available to view, download or print
Lab Cables BOD sensor includes 2-meter cable; 1 or 4 meters on lab pH, ORP and pH/ORP cables
Languages English, Spanish, German, French, Italian, Norwegian, Portuguese, Japanese, Chinese (Simplified & Traditional)
Logging Modes Single or Continuous
Operating Temperature -10 to 60°C
Power 2 alkaline C-cells provide 80 continuous hours at ambient temperature without backlight; ProComm II saddle provides USB power or optional wall power, cigarette lighter, and universal cell phone charger options
Storage Temperature -20 to 70°C
User ID Optional user ID for data security
Warranty 3-year instrument; 2-year field cables
Waterproof IP-67 (even with the battery cover off); floats
Weight with Batteries 475 grams (1.05 lbs)

Professional Plus System Specifications (Cables & Sensors)

 Sensor Type Range Accuracy Resolution Units Calibration
Dissolved Oxygen (%)
(temp comp range -5 to 45°C)		 Polarographic or Galvanic 0 to 500% 0 to 200%
(± 2% of reading or 2% air saturation, whichever is greater)
200% – 500% (± 6% of reading)		 1% or 0.1% air saturation
(user selectable)		 % 1 or 2-points with zero
Dissolved Oxygen (mg/L)
(temp comp range -5 to 45°C)		 Polarographic or Galvanic 0 to 50 mg/L 0 to 20 mg/L
(± 2% of reading or 0.2 mg/L, whichever is greater)
20 – 50 mg/L (± 6% of reading)		 0.1 or 0.01 mg/L (user selectable); 0.1% air saturation mg/L, ppm 1 or 2-points with zero
Temperature
(Field rugged cables)
-5 to 70°C ±0.2°C (±0.3°C cables over 45-meters) 0.1°C °C, °F, K
Temperature
(Lab-grade)*
0 to 40°C ±0.35°C 0.1°C °C, °F, K
Conductivity** Four electrode cell 0 to 200 mS/cm
(auto range)		 ±0.5% of reading or 0.001 mS/cm, whichever is greater (1-, 4-m cable) ±1% of reading or 0.001 mS/cm, whichever    is greater (20-m cable) 0 to 0.500 mS/cm = 0.001
0.501 to 50.00 mS/cm = 0.01
50.01 to 200 mS/cm = 0.1
(range dependent)		 µS, mS 1 point
Salinity Calculated from conductivity and temperature 0 to 70 ppt ±1.0% of reading or 0.1 ppt, whichever is greater 0.01 ppt ppt, PSU 1 point
pH Glass Combination Electrode 0 to 14 units ±0.2 units 0.01 units mV, pH units 1, 2, 3, 4, 5, or 6 point (user selectable);         US, NIST or Custom       Buffers
ORP Platinum button --1999 to +1999 mV ±20 mV in redox standards 0.1 mV mV 1 point
Ammonium***
(ammonia with pH sensor)		 Ion Selective Electrode 0 to 200 mg/L-N, 0 to 30°C ±10% of reading or 2 mg/L-N, whichever is greater 0.01 mg/L mg/L-N, mV 1, 2, or 3 point
(user selectable)
Nitrate*** Ion Selective Electrode 0 to 200 mg/L-N, 0 to 30°C ±10% of reading or 2 mg/L-N, whichever is greater 0.01 mg/L mg/L-N, mV 1, 2, or 3 point
(user selectable)
Chloride*** Ion Selective Electrode 0 to 1000 mg/L, 0 to 40°C ±15% of reading or 5 mg/L, whichever is greater 0.01 mg/L mg/L-Cl-, mV 1, 2, or 3 point
(user selectable)
Total Dissolved Solids (TDS) Calculated from conductivity and temperature 0 to 100 g/L TDS constant range 0.30 to 1.00 (0.64 default)
0.001, 0.01, 0.1g/L kg/L, g/L
Barometer Piezoresistive 375 to 825 mmHg ±1.5 mmHg from 0 to 50°C 0.1 mmHg mmHg, inHg, mbar, psi, kPa, ATM 1 point
Instrument Only Specifications (at Ambient Temperature)
pH
-2.60 to 16.60 ±0.1 mV (0.01 pH units) 0.1 mV (0.01 pH units)

ORP
-1999 to +1999 mV   ±0.5 mV   0.1 mV

Conductivity
0.0 to 200 mS/cm each range ±0.1% FS ±1 digit for µS/cm to 0.1 mS/cm (range dependent) 0.0001 mS/cm or 0.1

Dissolved Oxygen
0.00 to 90 mg/L; 0 to 550% ±0.2% FS (550% air saturation) ±1 digit (with 1.25 PE membrane at 10°C) 0.01 mg/L; 0.1% air saturation

Temperature
-10 to 100.00°C ±0.2% FS ±1 digit 0.1°C °C, °F, K
*Lab-grade cables include 605107, -108, -109, 605177, -178, -179
** Derived parameters can include resistivity, salinity, specifi c conductance, and total dissolved solids
***ISE sensors for freshwater only; 17-meter maximum depth

Ordering Guide
Step 1: Order Instrument
Item # Description
6050000 Instrument, includes Data Manager software, the ProComm II  communications saddle, and USB cable


Step 2: Order Cable(s)
All cables include temperature; cables 4- through 30-meters include cable management kit; cables with conductivity include sensor (no need to order conductivity sensor)
60510 1, 4, 10, 20 or 30 meter: ISE1/temp
60520 1, 4, 10, 20, 30 or up to100 meters2: DO/temp
60530 1, 4, 10, 20 or 30 meter: conductivity/temp
6051010 1, 4, 10, 20 or 30 meter: ISE/ISE/temp
6051020 1, 4, 10, 20 or 30 meter: ISE/DO/temp
6051030 1, 4, 10, 20 or 30 meter: ISE/conductivity/temp
6052030 1, 4, 10, 20 or 30 meter: DO/conductivity/temp
605790 1, 4, 10, 20 or 30 meter: ISE/ISE/DO/conductivity/temp
605107 1–meter single junction pH sensor & cable
605177 4–meter single junction pH sensor & cable
605108 1–meter single junction ORP sensor & cable
605178 4–meter single junction ORP sensor & cable
605109 1–meter single junction pH/ORP sensor & cable
605179 4–meter single junction pH/ORP sensor & cable


Step 3: Order Sensor(s)
605202 Galvanic DO
605203 Polarographic DO
605780 Self-stirring BOD (2-meter cable included)
605101 pH (ISE)
605102 ORP (ISE)
605103 pH/ORP combination (ISE)3
605104 Ammonium (ISE)
605105 Chloride (ISE)
605106 Nitrate (ISE)
1 ISEs include pH, ORP, Ammonium, Nitrate, Chloride
2 Special order cables in 10-meter increments up to 100 meter available
3 Not recommended on 6051010 or 605790 cables. Only pH would appear.

Ordering Guide for Professional Plus Kits
Item # Description Included in Kit
603165 BOD Kit, US Pro Plus meter, ProBOD self-stirring BOD probe, Lab Dock, US Power Supply (073035) and ProComm II power (605209)
603219 BOD Kit, INT Pro Plus meter, ProBOD self-stirring BOD probe, Lab Dock, International power supply (073047) and ProComm II power (605210)
603166 BOD/pH Kit, US Pro Plus meter, ProBOD self-stirring BOD probe, lab pH sensor (605107), Lab Dock, US power supply (073035) and ProComm II power (605209)
603220 BOD/pH Kit, INT Pro Plus meter, ProBOD self-stirring BOD probe, lab pH sensor (605107), Lab Dock, International power supply (073047) and ProComm II power (605210)
603167 Pol DO Lab/Field Kit, 4-m, US Pro Plus meter, ProBOD self-stirring BOD probe, 4-meter field cable with polarographic DO probe, Lab Dock, US power supply (073035) and ProComm II power (605209), soft-sided carrying case (603162)
603221 Pol DO Lab/Field Kit, 4-m, INT Pro Plus meter, ProBOD self-stirring BOD probe, 4-meter field cable with polarographic DO probe, Lab Dock, International power supply (073047) and ProComm II power (605210), soft-sided carrying case (603162)
603178 Gal DO, 4-m Pro Plus meter, 4-meter field cable with galvanic DO probe, soft-sided carrying case (603162)
603179 Pol DO, 4-m Pro Plus meter, 4-meter field cable with polarographic DO probe, soft-sided carrying case (603162)
603180 Pol DO/Con, 4-m Pro Plus meter, 4-meter field cable with polarographic DO probe and conductivity, soft-sided carrying case (603162)
603181 Gal DO/Con, 4-m Pro Plus meter, 4-meter field cable with galvanic DO probe and conductivity, soft-sided carrying case (603162)
603182 Pol DO/Con, 10-m Pro Plus meter, 10-meter field cable with polarographic DO probe and conductivity, soft-sided carrying case (603075)
603183 Gal DO/Con, 10-m Pro Plus meter, 10-meter field cable with galvanic DO probe and conductivity, soft-sided carrying case (603075)
603184 Pol DO/pH, 4-m Pro Plus meter, 4-meter field cable with polarographic DO probe and pH, soft-sided carrying case (603162)
603185 Gal DO/pH, 4-m Pro Plus meter, 4-meter field cable with galvanic DO probe and pH, soft-sided carrying case (603162)
603186 Pol DO/pH, 10-m Pro Plus meter, 10-meter field cable with polarographic DO probe and pH, soft-sided carrying case (603075)
603187 Gal DO/pH, 10-m Pro Plus meter, 10-meter field cable with galvanic DO probe and pH, soft-sided carrying case (603075)
603188 pH/Con, 4-m Pro Plus meter, 4-meter field cable with pH and conductivity, soft-sided carrying case (603162)
603189 pH/Con, 10-m Pro Plus meter, 10-meter field cable with pH and conductivity, soft-sided carrying case (603075)
603190 Pol DO/pH/Con, 4-m Pro Plus meter, 4-meter Quatro field cable with polarographic DO probe, pH and conductivity, soft-sided carrying case (603075)
603223 Pol DO/pH/ORP/Con, 4-m Pro Plus meter, 4-meter Quatro field cable with polarographic DO probe, pH/ORP combo and conductivity, soft-sided carrying case (603075)
603191 Gal DO/pH/Con, 4-m Pro Plus meter, 4-meter Quatro field cable with galvanic DO probe, pH and conductivity, soft-sided carrying case (603075)
603224 Gal DO/pH/ORP/Con, 4-m Pro Plus meter, 4-meter Quatro field cable with galvanic DO probe, pH/ORP combo and conductivity, soft-sided carrying case (603075)

.
.
.
.
.
.
.
..
.
.



.




 =====================================================
42.  Portable Dissolved Oxygen Monitor
 Model : Handy Polaris
 Merk : Partech
 Negara Asal : UK ( Inggris )  

Specification :
Dissolved Oxygen Range0-60 mg/l (ppm), 0-600 %Sat
Principal of OperationGalvanic Cell, Self-Polarising, Self Temperature Compensating
AccuracyBetter than +/- 1% of measured value
RepeatabilityBetter than +/- 0.5% of measurement
Response Time90% of end value in less than 20 seconds in water
Temperature Range-5 to 45°C
Temperature Accuracy+/- 0.2°C
Salinity Compensation0-59 ppt - manually set
Temperature CompensationAutomatic
Barometric Pressure CompensationAutomatic


Physical
Dimensions (hxwxd)Monitor: 98mm Diameter x 36 mm
Weight0.5 kg
Protection ClassElectronics: IP65
Sensor: IP68 to 5 metres
Enclosure MaterialPolyoxymethylene (POM)
Cable EntryIntegral Cable Gland
Cable Lenght3 metres standard, 100 metre maximum
Electrical
Power SupplyStandard PP9, 9V Battery
Battery LifeApproximately 2 years with 1 hour's use per day, 5 months with 8 hours per day
Environmental Data
Operating/Storage TemperatureMonitor: -20 to 60ºC
Sensor: -5 to 45ºC
LocationPortable Indoor/Outdoor
User Interface
DisplayGraphical providing 3 1/2 digit Display
Setupvia 6 Button Membrane Keypad
Self CheckingPower Up check of Probe Function, Electronic Function, Cable and Battery Condition
Units of Measurementmg/l, ppm, %Sat


The handheld monitor has a large display and an extremely long battery life – many months of normal operation. The system carries out a self-check process every time it is switched on and will carry out calibration of the system at the push of a button. The long standing ability to store the probe dry removes the need for regular probe regeneration and means that the system is ready for us straight from the bag.
The Handy Polaris is supplied with a self polarising, galvanic sensor which is self temperature compensating and can be stored dry. There is no need for any maintenance other than wiping the sensor clean after use. The power consumption is exceptionally low, typically providing 1400 hour use from a single 9V battery.


==============================
..


43. Water Level Meter 
       Brand : Solinst  - USA
        Type : 101

Fitur :
Akurat:
• Penandaan setiap ft 1/100 atau milimeter,
• Bersertifikat ditelusuri dengan Standar Nasional,
• disesuaikan untuk konduktivitas Sensitivitas.
• Probe menghindari pembacaan palsu dalam Cascading air 
Reliable:
• tanda laser yang Permanen.
• Non-peregangan PVDF pita datar dengan konduktor stainless steel.

Long Life:
• Rugged, komponen tahan korosi.
• Kuat, fleksibel kaset.
• Mudah untuk sumbatan dan memperbaiki.
- See more at: http://telephone_satelit.web.indotrading.com/product/spesifikasi-dan-harga-p35765.aspx#sthash.o4yYk762.dpuf



Fitur :
Akurat:
• Penandaan setiap ft 1/100 atau milimeter,
• Bersertifikat ditelusuri dengan Standar Nasional,
• disesuaikan untuk konduktivitas Sensitivitas.
• Probe menghindari pembacaan palsu dalam Cascading air 
Reliable:
• tanda laser yang Permanen.
• Non-peregangan PVDF pita datar dengan konduktor stainless steel.

Long Life:
• Rugged, komponen tahan korosi.
• Kuat, fleksibel kaset.
• Mudah untuk sumbatan dan memperbaiki.






Fitur :
Akurat:
• Penandaan setiap ft 1/100 atau milimeter,
• Bersertifikat ditelusuri dengan Standar Nasional,
• disesuaikan untuk konduktivitas Sensitivitas.
• Probe menghindari pembacaan palsu dalam Cascading air 
Reliable:
• tanda laser yang Permanen.
• Non-peregangan PVDF pita datar dengan konduktor stainless steel.

Long Life:
• Rugged, komponen tahan korosi.
• Kuat, fleksibel kaset.
• Mudah untuk sumbatan dan memperbaiki.
- See more at: http://telephone_satelit.web.indotrading.com/product/spesifikasi-dan-harga-p35765.aspx#sthash.o4yYk762.dpufs



.
..
..
.
.
..
.
.
..

WATER QUALITY MUTI PARAMETER

ALAT UKUR KUALITAS AIR

WATER TESTER

WATER QUALITY METER

ALAT UJI AIR

ALAT UKUR AIR

HARGA WATER QUALITY MULTI PARAMETER Rp...


MERK :
- BANTE
- EZDO
- PALINTEST
- MILWAUKE
- LOVIBOND
- VZOR
- AZ INSTRUMENT
- EXTECH
- LUTRON
- HANNA INSTRUMENT
- EUTECH
- HORIBA
- AQUA
- LOVIBOND
- DKK TOA
- TRANS INSTRUMENT
Dll

.
.
..
.
..
.
.
.
.
Diposkan oleh BINTANG INSTRUMENT 081362449440 di
Label:
Lokasi: INDONESIA LTC-Glodok, Jl. Hayam Wuruk No.127, RT.1/RW.6, Mangga Besar, Kec. Taman Sari, Kota Jakarta Barat, Daerah Khusus Ibukota Jakarta 11180, Indonesia

1 komentar:

  1. herymeelon29 Juli 2020 pukul 17.25

    They're available at land sway people lament. The authenticities of one's method essays are more relieve. The policies are coalition shut trio key types: privacy, inequalitys as well as recover policies. harga folding gate

    BalasHapus

Langganan: Posting Komentar (Atom)